unable to connect to proxy sever

[PrasadHol2001]

I have added proxy settings, but a window keeps appearing. Please assist me in resolving this issue and guide me on how to bypass it.

Screenshot (527).png (129.21 KiB) Viewed 1017 times

Screenshot (529).png (239.47 KiB) Viewed 1010 times

Screenshot (528).png (240.42 KiB) Viewed 1010 times

[clarity]

Please share screenshot of:

1. http://safesquid.cfg
2. Proxy Configuration for your browser

[clarity]

Check if your desktop can access swg.safesquid.in:8080
From your desktop:

1. ping swg.safesquid.in
   This should tell you if the FQDN is resolvable by your desktop
2. telnet swg.safesquid.in 8080
   If the FQDN is resolvable, this will tell you if your desktop can actually connect to the service

[PrasadHol2001]

After checking for the 'ping' command, it appears like this

Screenshot (531).png (181.56 KiB) Viewed 1008 times

[clarity]

Obviously then your desktop cannot resolve the FQDN swg.safesquid.in
Instead of setting the FQDN as the proxy host, you should set the IP address of your proxy service in your browser configuration

[PrasadHol2001]

I have a question regarding the SafeSquid interface. Are the credentials 192.168.221.1 and port 8080 correct for accessing it?

[clarity]

I presume you followed instructions from:
https://docs.safesquid.com/wiki/Standard_Installation
for installation
After the installation was done, the first login should have prompted you to set password for user administrator
https://docs.safesquid.com/images/a/ac/ ... ssword.png
Next you would need to activate the instance as:
https://docs.safesquid.com/wiki/How_to_ ... d_Instance
you should provide credentials as:
username: administrator
password: <the password you set during the first log in on the console>