issue in proxy setting for safesquid

Tell everybody, what you think about SafeSquid!
Speak your mind!
India MhatreRutika97
Posts: 6
Joined: Wed Sep 18, 2019 11:00 am

issue in proxy setting for safesquid

Post by MhatreRutika97 » Wed Sep 18, 2019 11:02 am

Hi Team,
We are done with the installation of safesquid on windows server 2012 r2. But we are not able to see the dashboard (http://safesquid.cfg/), because we are facing the issue of proxy server setting. So kindly guide us regarding this issue.

India santosh
Posts: 22
Joined: Wed Apr 24, 2019 7:33 am
Location: Mumbai

Re: issue in proxy setting for safesquid

Post by santosh » Wed Sep 18, 2019 11:45 am

Hello,
You can go through this link to access the SafeSquid User Interface : https://docs.safesquid.com/wiki/Access_ ... _Interface.

You can also precisely find the instructions to set the proxy on any of the known browser using this link : https://www.wikihow.com/Change-Proxy-Settings

To access the Interface, you must configure your web-browser to use the SafeSquid® proxy server.
For example> If you have set-up SafeSquid to listen on IP Address 192.168.0.130 and port 8080, then you should configure your web-browser to use proxy at 192.168.0.130 on port 8080
Further you can access the SafeSquid User Interface with the URL : http://safesquid.cfg

Note:- SafeSquid highly recommends to use Google Chrome or Firefox Browser.

India MhatreRutika97
Posts: 6
Joined: Wed Sep 18, 2019 11:00 am

Re: issue in proxy setting for safesquid

Post by MhatreRutika97 » Wed Sep 18, 2019 11:55 am

Hi Team,
We already go through this bothe link. But we not able to see the dashboard.

India santosh
Posts: 22
Joined: Wed Apr 24, 2019 7:33 am
Location: Mumbai

Re: issue in proxy setting for safesquid

Post by santosh » Wed Sep 18, 2019 12:35 pm

Hello,

Which SafeSquid for Windows version have you installed on your machine?
Can You confirm with the installation success in your machine?

Below are the 2 ways to check whether SafeSquid service is successfuly installed or not.

1. You can check with SafeSquid service manager is been installed on your system or not from : Programs > SafeSquid > SafeSquid Service Manager.
The service manager is accountable for modifying current release setting(s) and putting the service in motion.

2. Also you can check using Windows Service Manager.
Right-click on your Start button to open the WinX Menu. Select Run. This opens the Run box. Now type services.msc in it and hit Enter to open the Services Manager.
Here under the Name column, you will see the list of Services running on your system, along with their description. Check whether SafeSquid service is listed there - whether its running or stopped, along with the Startup types.

Note : - Post Installation SafeSquid for Windows should be restarted. Three ways to do this.
1. You can use SafeSquid Service Manager to start, stop or restart SafeSquid service post installation.
2. You can also start or stop SafeSquid services from Start > Run > services.msc.
3. You can also use the command prompt with the command net start safesquid and net stop safesquid.

India MhatreRutika97
Posts: 6
Joined: Wed Sep 18, 2019 11:00 am

Re: issue in proxy setting for safesquid

Post by MhatreRutika97 » Thu Sep 19, 2019 6:16 am

We have done already what you mentioned in the replay. But we do not get dashboard.

India santosh
Posts: 22
Joined: Wed Apr 24, 2019 7:33 am
Location: Mumbai

Re: issue in proxy setting for safesquid

Post by santosh » Thu Sep 19, 2019 11:10 am

Hi,
SafeSquid Appliance Builder(SAB) is the most recommended installer for you.
SAB is a customized version of Ubuntu 14.04 x86_64 minimal iso. You may create a virtual appliance using the SAB iso on any virtualization infrastructure, or boot a standard Intel Server hardware to create a hardware appliance.

You can download it from - http://downloads.safesquid.net/appliance/safesquid.iso .

You can install Hyper-V on your windows machine and install SafeSquid.iso on it.

India MhatreRutika97
Posts: 6
Joined: Wed Sep 18, 2019 11:00 am

Re: issue in proxy setting for safesquid

Post by MhatreRutika97 » Fri Sep 20, 2019 5:10 am

Ok, we are done with installation in virtual box.

India santosh
Posts: 22
Joined: Wed Apr 24, 2019 7:33 am
Location: Mumbai

Re: issue in proxy setting for safesquid

Post by santosh » Fri Sep 20, 2019 5:45 am

Hi,

After installation you need to Activate a SafeSquid Instance before using it to access the web.

Please follow these links which will be helpful for you.
Setup Your Secure Web Gateway With SafeSquid Appliance Builder.
How to Activate a SafeSquid Instance.

India MhatreRutika97
Posts: 6
Joined: Wed Sep 18, 2019 11:00 am

Re: issue in proxy setting for safesquid

Post by MhatreRutika97 » Fri Sep 20, 2019 10:06 am

Hi,
We are done upto mentioned in the first link after that what should I do for getting the dashboard?

India santosh
Posts: 22
Joined: Wed Apr 24, 2019 7:33 am
Location: Mumbai

Re: issue in proxy setting for safesquid

Post by santosh » Fri Sep 20, 2019 10:34 am

Hello,

You will get the dashboard/interface once you configure your web-browser with the proxy IP and Port.

For example> If you want SafeSquid to listen on IP Address 192.168.0.130 and port 8080, then you should configure your web-browser to use proxy at 192.168.0.130 on port 8080
After setting your proxy on browser just type the URL http://safesquid.cfg on address bar and you will see the dashboard on your screen.

Post Reply